Top Menu

Other QDS Products

QDS Fitters Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 3100kg
  • WLL: 3000kg
  • Dimensions:
    • Length 3275mm
    • Width 2200mm
    • Height 1820mm
  • 12 x Individual tradesmen's lockers
  • 12 x Sliding drawers
  • 1 x High density storage module
  • 6 x Open shelves
  • 2 x Storage baskets
  • Fork pockets for ease of handling
OPTIONS
  • Communal crew lockers can be included
  • Quantity, size and configuration of drawers, lockers and storage modules can all be customised to meet your exact requirements

QDS Spares Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 3600kg
  • WLL:
    • 3000kg when used on 10 tonne LHD
    • 2700kg when used on 7 tonne LHD
  • Dimensions:
    • Length 3840mm
    • Width 1800mm
    • Height 1940mm
  • 15 x Sliding drawers
  • 4 x Lockers
  • 2 x High density storage modules (not shown in photo)
  • 1 x Storage basket
  • Storage for short and long hydraulic hoses
  • Offset vice
  • Fork pockets for ease of handling
OPTIONS
  • Quantity, size and configuration of drawers, lockers and storage modules can all be customised to meet your exact requirements

QDS Lubrication Pod

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1500kg (dry weight)
  • Dimensions:
    • Length 1777mm
    • Width 1932mm
    • Height 1615mm
  • Tank Capacity:
    • 2 x 250 litres
    • 1 x 500 litres
  • Fork pockets for ease of handling
  • Bund design compliant with AS1940-2004
  • Tank design compliant with AS1692-2006
  • 2 x 9kg dry chemical powder fire extinguishers
  • High level and low level sight glasses on each tank
  • Easy removal of tanks for inspection and maintenance
OPTIONS 
  • Quantity and capacity of tanks
  • AFFF fire suppression system
  • Orientation of hose reels customised to specific requirements

QDS Oil Tank Transporter

  SPECIFICATIONS / FEATURES
  • Tare Mass: 1750kg
  • WLL: 3000kg
  • Dimensions:
    • Length 2835mm
    • Width 2300mm
    • Height 1400mm
  • Carries 2 x 1000 litre oil pods
  • 2 x Diaphragm pumps and hose reels
  • 2 x Air filter / regulator / lubricators
  • Rated tie down points for oil pods
  • Non-slip checker plate floor
OPTIONS
  • Bunded floor

QDS Fuel Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 3200kg (dry weight)
  • Tank Capacity: 2000 litres
  • Dimensions:
    • Length 1900mm
    • Width 1850mm
    • Height 1650mm
  • AFFF fire suppression system (not shown)
  • Tank design complies with AS1692-2006
  • Bund design complies with AS1940-2004
  • Spring retract hose reel with 15m of 1” FRAS hose
  • 1” FRAS diaphragm pump
  • Fork pockets for ease of handling
OPTIONS
  • Timer system for air supply
  • Various tank capacities available

QDS Solcenic Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 1200kg
  • Capacity: 2000 litres
  • Dimensions:
    • Length 1510mm
    • Width 1500mm
    • Height 1440mm
  • Multiple sight glasses in protected location
  • Tank fabricated from 304 stainless steel
  • Mounting plate for diaphragm pump
  • Fill point, breather and suction outlet on top of tank
  • Drain bung in protected location on bottom of tank
  • Fork pockets for ease of handling
OPTIONS
  • Can be supplied complete with diaphragm pump

QDS Crib Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 2200kg
  • Dimensions:
    • Length 4475mm
    • Width 2300mm
    • Height 1385mm (whiteboard folded down)
    •                2058mm (whiteboard upright)
  • Stainless steel table tops
  • FRAS upholstery on seat covers
  • Cupboard doors sealed for dust exclusion
  • Whiteboard and corkboard on folding frame
  • Cupboards made from zincanneal sheet (painted inside & out)
OPTIONS
  • Stainless steel cupboards (as pictured above)
  • Hot dip galvanised base frame (as pictured above)
  • Customised seating and cupboard configurations available

QDS Structure Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 3550kg
  • WLL: 3000kg (10 tonne LHD only)
  • Dimensions:
    • Length 3930mm
    • Width 3300mm
    • Height 1855mm
  • Carries matched quantities of structure components
  • WLL maximised to capacity of 10 tonne LHD for maximum efficiency
  • Non-slip checker plate floor for maximum safety
  • Ergonomically designed to prevent strain injuries
  • Built strong to suit the harsh conditions of the underground environment
  • Fork pockets for ease of handling
OPTIONS
  • Design can be customised to suit different structure types

QDS Mesh Pod

SPECIFICATIONS / FEATURES 
  • Tare Mass: 2600kg
  • WLL:
    • 3000kg when used on 10 tonne LHD
    • 2000kg when used on 7 tonne LHD
  • Dimensions:
    • Length 6300mm
    • Width 3010mm
    • Height 1570mm
  • Mesh Size: 5800mm x 2400mm sheets
  • Capacity:
    • 100 sheets (with 10 tonne LHD)
    • 70 sheets (with 7 tonne LHD)
  • 4 x tie down points
OPTIONS 
  • Design can be modified to suit different sheet sizes as required

QDS Cable Boat

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1400kg
  • WLL: 2000kg
  • Dimensions:
    • Length 3700mm
    • Width 1200mm
    • Height 1470mm
  • Single cable roller with bearings
OPTIONS 
  • Fold down side platforms
  • Side guide rollers for cable exit
  • Suspended conveyor rubber design available if preferred

QDS DCB Pod

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1200kg (without DCB)
  • WLL:
    • 5500kg when used on 10 tonne LHD
    • 4500kg when used on 7 tonne LHD
  • Dimensions:
    • Length 3680mm
    • Width 1164mm
    • Height 1550mm
  • Easy access to all enclosures and flame paths
  • Easy access to cable receptacles
  • Removable guard rails along sides
  • Basket for storing cable caps
  • Document holder for storing drawings
  • Hot dip galvanised for maximum service life
  • Fork pockets for ease of handling
OPTIONS 
  • Rud lugs at corners for dragging into position
  • QDS-Products_DCB-Pod

QDS Fines Pod

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1900kg
  • WLL:
    • 6000kg if used on 10 tonne LHD
    • 4200kg if used on 7 tonne LHD
  • Dimensions:
    • Length 2725mm
    • Width 2300mm
    • Height 1470mm
  • Tie-off points for anchoring inlet hoses to pod
  • Weir plate to separate fines out of water
  • Large suction outlets set flush with floor of pod for ease of cleaning out
  • Fork pockets for ease of handling
OPTIONS 
  • Storage facilities for blanking caps
  • P9050105

QDS Skip Bin

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1680kg
  • WLL: 4000kg
  • Dimensions:
    • Length 2725mm
    • Width 2300mm
    • Height 1470mm
  • Rud lugs for securing load
  • Fork pockets for ease of handling
  • Rear wall inclined to improve tipping angle
  • Drain holes to prevent skip from filling with water
OPTIONS 
  • Alternate dimensions and WLL available on request

QDS Duck Bill

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1850kg
  • WLL:
    • 7000kg if used on 10 tonne LHD
    • 5000kg if used 7 tonne LHD
  • Dimensions:
    • Length 2875mm
    • Width 2600mm
    • Height 1465mm
  • Pallet area: 2600mm x 2480mm
  • Tie down points for securing load
  • Fork pockets for ease of handling
OPTIONS 
  • Removable front gates
  • Removable sideboard extensions
  • Customised sideboard heights

QDS Offset Attachment

SPECIFICATIONS / FEATURES
  • Tare Mass: 1500kg
  • WLL: 5000kg
  • Dimensions:
    • Length 780mm
    • Width 2100mm
    • Height 1230mm
  • Off-Set: 520mm to left or right of centre
  • Patented design
  • Genuine Eimco lock cylinder for ease of maintenance
OPTIONS 
  • Storage frame

QDS Parrots Beak

  SPECIFICATIONS / FEATURES
  • Tare Mass: 700kg
  • Maximum ATM: 13600kg
  • Dimensions:
    • Length 800mm
    • Width 1220mm
    • Height 1230mm
  • Rud lugs for safety chain connection
  • Feet for enhanced free standing capability

QDS Trencher

SPECIFICATIONS / FEATURES 
  • Mass: 1200kg
  • Dimensions:
    • Length 2670mm
    • Width 1200mm
    • Height 1400mm
  • Trench Depth: 900mm
  • Trench Width: 150mm standard (other widths available)
  • Chain Type:      Combo for all round performance
OPTIONS 
  • Replacement chains for 200mm, 250mm & 300mm trench width
  • Replacement chain for hard cutting conditions
  • Upgrade option for trench depths up to 1200mm

QDS Auger

SPECIFICATIONS / FEATURES 
  • Mass: 1200kg
  • Dimensions:
    • Length 2000mm
    • Width 1200mm
    • Height 1400mm
  • Hole Diameter: 450mm standard (other diameters available)
OPTIONS 
  • Swing Control System for improved safety
  • Augers ranging from 150mm diameter to 1200mm diameter

QDS Jackpick

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1400kg
  • Dimensions:
    • Length 3700mm
    • Width 1200mm
    • Height 1400mm
  • Easy change-out of picks
  • Head swivels to allow jack picking of rib or floor
  • Side plates reinforced for added strength
OPTIONS 
  • Various sizes of jack pick available

QDS Concrete Scarifier

SPECIFICATIONS / FEATURES 
  • Tare Mass: 1500kg
  • Dimensions:
    • Length 2100mm
    • Width 1230mm
    • Height 1440mm
  • Depth of Cut: Up to 38mm
OPTIONS 
  • Scarifier can be hired if only required short term
  • QDS Attachment can be modified to Parrot’s Beak

QDS Backhoe

SPECIFICATIONS / FEATURES 
  • Various sizes available
  • All hosing MDG 41 compliant
  • Emergency stop button (shuts down LHD)

QDS Concrete Kibble

SPECIFICATIONS / FEATURES 
  • Tare Mass: 2300kg
  • WLL: 7700kg (10 tonne LHD only)
  • Capacity: 3.2 cubic metres
  • Dimensions:
    • Length 1800mm
    • Width 1800mm
    • Height 1450mm
  • Volume maximised to capacity of 10 tonne LHD for maximum efficiency
  • Shape promotes flow of concrete and prevents material hanging up in corners
  • Hinged gate valve provides improved reliability compared to sliding gate
  • Fork pockets and Rud lugs for ease of handling
OPTIONS 
  • Hydraulic activation of feed chute door(s)
  • Open top or closed top with hinged hatch
  • Traditional square shaped kibble with multiple feed chutes in various locations
  • 2.1 cubic metre version to suit 7 tonne LHD's

QDS Ejector Bucket

SPECIFICATIONS / FEATURES 
  • Tare Mass: 2950kg
  • WLL: 5500kg
  • Capacity: 4 cubic metre
  • Dimensions:
    • Length 2070mm
    • Width 2505mm
    • Height 1242mm
  • Reinforced corners
  • MDG41 compliant hosing
OPTIONS 
  • Fixed floor (Non-eject style)
  • Various sizes available

QDS Lifting Equipment Pod

SPECIFICATIONS / FEATURES
  • Tare Mass: 1500kg
  • WLL: 4000kg
  • Dimensions:
    • Length 2300mm
    • Width 1450mm
    • Height 1850mm
  • Storage baskets on top of pod
  • Lockable doors with padlock protection
  • Hanging rails for chain block and lever hoists
  • Storage hooks and compartments for shackles, eye nuts, etc
OPTIONS
  • Storage baskets can be omitted if preferred
  • Alternate dimensions and WLL available on request
 

QDS Attachment Locks

The benefits of QDS attachment locks are many.
  1. They prevent new attachments from being used before introduction to site is completed
  2. The prevent out of service attachments from being used while they are waiting for repairs
  3. They prevent "inter-departmental" disputes over attachments by identifying and segregating longwall attachments from development attachments (for example)
  4. They prevent mixing of colliery owned and contractor owned attachments
  5. They improve efficiency of projects and down days: attachments can be staged with certainty that they will be there when they are required
Our heavy duty, anti-tamper QDS attachment locks are strong, secure and highly visible.  Features include:
  • One piece design, preventing loss of parts
  • Bolt cutter proof
  • Powder coated for corrosion resistance
  • Available in a range of colours for identification purposes

Copyright © 2014 Jet Engineering. All Rights Reserved